- Using SafetyCulture
- Sensors
- Check sensor signal strength in the Focus tab
Check sensor signal strength in the Focus tab
Learn how to check sensor signal strength in the Focus tab via the web app and the mobile app.
Why check sensor signal strength in the Focus tab?
The Focus tab is a great way to cut through the noise and only focus on sensor alerts that require your immediate attention and create actions based on them. You can also identify sensors with weak signal strength to monitor connectivity between SafetyCulture and sensors.
What you'll need
Take note
The "Active alerts" or "Sensors with weak signal" sections will only be available if there are live sensor alerts or sensors with weak signal strengths.
RSSI is the measurement for most of sensors signal strength. The RSSI standard dictates that the closer the value is to 0, the stronger the signal is.
If you have sensors that appear to be disconnected or offline, please check our sensor troubleshooting guide. You can also contact our customer support team for further assistance.
Ratings | Monnit sensors (%) | All other sensors (dBm) |
|---|---|---|
| 0% to 19% | Less than -120 dBm |
| 20% to 39% | -111 dBm to -120 dBM |
Check a sensor's signal strength
Select Sensors from the menu on the left-hand side.
Select the Focus tab at the top of the page.
Scroll down to check sensors with weak signal strengths, available under the "Sensors with weak signal" section.
Open the mobile app.
Tap
More at the lower-right corner of your screen.Select Sensors from the list of options.
Select the Focus tab at top of your screen.
Scroll down to check sensors with weak signal strengths, available under the "Sensors with weak signal" section.
Was this page helpful?
Thank you for letting us know.